Description
TRANE Commercial
แอร์เชิงพาณิชย์ TRANE Air Handling Unit LPCQ (Single Skin AHU)
แอร์เชิงพาณิชย์ TRANE Single Skin AHU เทคโนโลยีสำหรับการใช้งานเชิงพาณิชย์ที่หลากหลาย
TRANE AHU แบบต่อท่อลม
Product Features
• Duct Type Single Skin Air Handling Unit
• Customized model
• Airflow : 2,000-38,000 CFM
Model
LPCQ003 | LPCQ004 | LPCQ006 | LPCQ008 | LPCQ010 | LPCQ012 | LPCQ014
Nominal Airflow
2,000 CFM | 2,500 CFM | 3,000 CFM | 4,000 CFM | 5,000 CFM | 6,000 CFM | 7,000 CFM | 8,000 CFM
9,000 CFM | 100,000 CFM | 110,000 CFM | 120,000 CFM | 130,000 CFM | 140,000 CFM
Features and Benefits
LPCQ is a new series of air handling units developed by TRANE on the basis of years of experience, with the air volume range of 2,000-3,8000 CMH. It adopts double skin panel, reasonable structure, beautiful appearance, superior performance and reliable quality. This product can be widely used in retail, shopping mall, office, hotel, theater, airport and institutions.
Casing
The casing is composed of frame and double panel. The outer panel is made of high-quality coated galvanized sheet, which has the advantages of anticorrosion and long service life. The inner panel is galvanized steel, and the interlayer is filled with high-density polyurethane foam, which does not produce CFC at all, and the potential consumption of ozone layer is zero. The double deck panel not only has good heat preservation performance, but also has sound absorption and noise reduction function. It has high rigidity and strength, and is easy to clean. There are two different thickness options of 25mm and 50mm.
Fan and Motor
The fan is a low noise centrifugal fan with double wide distance and double side air intake, and the bearing is permanently sealed and lubricated. After dynamic balance treatment, the fan impeller runs stably with low noise. Complete the assembly of fan, motor and drive belt in the factory to ensure the belt tightness is appropriate. The motor is equipped with IE2 motor as standard, and IE3 high efficiency motor is selected. It has high efficiency, large starting torque, small vibration and excellent performance. Each model can be equipped with different power motors to meet the requirements of various air volume and external static pressure.
Coil
Coil is used high quality copper tube and aluminum fin. Through mechanical expansion method, the copper tube is closely connected with the fin to ensure maximum heat exchange efficiency. The coil is tested under 2.5MPa (363 psig) pressure and has high pressure resistance. The arrangement sequence of cooling coil and heating coil can be flexibly arranged according to the actual requirements. It can prevent the coil from freezing crack in winter.
Filter
The pre-filter is a 1 “plate filter, which uses synthetic fiber, and has the characteristics of low resistance and high filtration efficiency. The installation mode is external side sliding type, which is convenient for replacement and convenient for users to disassemble and clean. For places with higher requirements, medium efficiency plate, cartridge and bag filters can also be added. The highest filtration efficiency can reach F9 level, which is an ideal choice for some places with purification requirements.
